Learning paths › CCNA
Cisco CCNA: Wire It, Route It, Secure It
Learn Cisco IOS the way you will use it: at a prompt, on a switch that answers back, building a branch network from an empty box to a working floor.
Level: Associate · Provider: Cisco
What you will be able to do
Configure, verify and troubleshoot a small dual-stack campus network, and explain where a packet goes and why.
- Work a Cisco IOS prompt without hesitating, and never lose a configuration to a reboot again.
- Build and fix VLANs, trunks, resilient switching, IPv4, IPv6 and OSPF.
- Lock down access, read the evidence a device gives you, and recognise the controller and API workflows replacing manual change.
Skills
- Cisco IOS
- Switching
- Routing
- Access security
- Troubleshooting
Courses
- 1. Network Fundamentals (42 lessons) — The groundwork that makes every other domain shorter: what each box in the rack is for, what a frame and a packet carry, how addressing and subnetting actually divide a network, and the media it all runs over. It also sets the method you will use everywhere else — change one thing, prove it, write down what you ruled out. Current exam scope: 200-301 v1.1, available through February 2, 2027. Cisco starts v2.0 on February 3, 2027; that revision needs a separate coverage review.
- 2. Network Access (57 lessons) — The switched floor. VLANs and trunks, loop prevention, link aggregation, the discovery protocols that tell you what is plugged in where, and the wireless infrastructure that extends the same access layer without a cable.
- 3. IP Connectivity (34 lessons) — Getting traffic off the LAN. How a router picks a path, static and dynamic routes, OSPF, and tracing a flow end to end so you can name the exact hop it died at instead of guessing.
- 4. IP Services (12 lessons) — The services a working network quietly depends on: address translation, DHCP, DNS, clock synchronisation, the logging and SNMP that make a fault visible afterwards, and the queuing that decides what gets dropped first.
- 5. Security Fundamentals (30 lessons) — Who can reach the device, and who can reach through it. Credentials and SSH instead of shared passwords, access lists, port security, DHCP snooping and ARP inspection, and the concepts the exam expects you to be able to describe.
- 6. Automation and Programmability (23 lessons) — The change you did not type. Controller-based networking and what it moves off the box, REST APIs and the data formats they answer in, and the configuration management tools replacing a change window of copy and paste.
- Prerequisite review: CCNA topics from the CCNP courses (22 lessons) — Switching, addressing, static routing, NAT, device services and wireless basics that the CCNP courses assume. These lessons used to sit between the OSPF and BGP lessons; they are collected here, in their original order, so the professional courses can start where the CCNA stops. Lesson ids are unchanged, so anything already finished stays finished.
Other learning paths
- Visual Modules: The CCNA, Drawn And Narrated
- Juniper JNCIA-Junos: One Candidate Config At A Time
- Arista EOS: Build The Switched Campus, Port By Port
- HPE Aruba AOS-CX: Campus Switching, Routed Both Ways
- Palo Alto PAN-OS: Everything Before You Touch Prod
- Fortinet FortiSwitch: Switching Under The Firewall's Thumb
- Linux For Network Engineers: The Shell Is The Interface
- Network Automation: Never Type The Same Change Twice
- Cloud Networking: Where The Packet Actually Goes
- Juniper Professional: Past The Associate, Into The Weeds
- Cisco CCNP Enterprise: Where The WAN Actually Lives
- Cisco CCNP Security: Lock Down What’s Already Live
- Cisco CCNP Data Center: Keep The Fabric Breathing
- BGP In Practice: The Protocol The Internet Runs On
- Enterprise Scenarios: Isolate The Fault, Then Defend The Call
- Network Security Engineer: Detect, Triage, Contain