Learning paths › CCNA › Prerequisite review: CCNA topics from the CCNP courses
Prerequisite review: CCNA topics from the CCNP courses
Switching, addressing, static routing, NAT, device services and wireless basics that the CCNP courses assume. These lessons used to sit between the OSPF and BGP lessons; they are collected here, in their original order, so the professional courses can start where the CCNA stops. Lesson ids are unchanged, so anything already finished stays finished.
Lessons
- Choose a static route or a routing protocol
- Address one receiver, a group, or the nearest node
- Give a branch a route home and back
- Point a default route at one ISP
- Translate private addresses at the edge
- Learn MACs and forward on destination plus VLAN
- Separate broadcast domains and trunk between switches
- Route between VLANs on the switch with SVIs
- Follow a frame through learning and flooding
- Bundle links and see why one flow stays on one
- Keep redundant links without a bridging loop
- Make the switch you chose win the root election
- Give each VLAN a gateway on a trunked subinterface
- Serve or relay DHCP from the switch
- Separate authentication, authorization and accounting
- Trace clock accuracy back through the strata
- Learn what is on the other end of a link
- Tell an autonomous AP from a lightweight one
- Replace WEP and TKIP with AES-CCMP
- Read a JSON object, array and value by hand
- Split one switch into separate broadcast domains
- Keep a loop-free topology over redundant links