Learning paths › CCNA › 1. Network Fundamentals
1. Network Fundamentals
The groundwork that makes every other domain shorter: what each box in the rack is for, what a frame and a packet carry, how addressing and subnetting actually divide a network, and the media it all runs over. It also sets the method you will use everywhere else — change one thing, prove it, write down what you ruled out. Current exam scope: 200-301 v1.1, available through February 2, 2027. Cisco starts v2.0 on February 3, 2027; that revision needs a separate coverage review.
Lessons
- Network Fundamentals
- Network Devices
- Cables & Interfaces
- TCP/IP & OSI Models
- Switch Interfaces
- IPv4 Header
- Wireless RF & Frequencies
- IEEE 802.11 Standards & Wi-Fi Generations
- Cisco IOS CLI
- Ethernet Switching 1
- Ethernet Switching 2
- IPv4 Addressing
- IPv4 Configuration
- Subnetting Basics
- Finding Subnets Fast
- VLSM Subnetting
- IPv6 Addressing & Representation
- Network Diagnostics
- IPv6 Address Scopes & Types
- IPv6 Configuration & EUI-64
- IPv6 SLAAC & Neighbor Discovery (NDP)
- IPv6 & NDP
- Your First Switch
- Name It Before You Forget
- Break It On Purpose
- Moving Between Modes
- Type Less, Break Nothing
- Every Command Has An Undo
- Down Is Not Always Broken
- Save It Or Lose It
- Checkpoint: Fix What You Inherited
- Leave A Notice On The Door
- A Password On Privileged Mode
- Secrets, And Locking The Console
- Letting People In Remotely
- Names Instead Of Shared Passwords
- Checkpoint: Access Review Before Go-Live
- Assessment: Build A Baseline Alone
- Read the MAC address table after traffic flows
- Filter the MAC table by type, VLAN and port
- Read IPv6 interface addresses and SLAAC results
- Addressing decisions: prove the subnet before changing it