Learning paths › CCNP Enterprise
Cisco CCNP Enterprise: Where The WAN Actually Lives
Build from an evidence baseline through campus resilience, routed WAN recovery, policy and tenant isolation. Continue into ENARSI fault diagnosis and Catalyst SD-WAN design and operations.
Level: Professional · Provider: Cisco
What you will be able to do
Diagnose campus and WAN faults, justify a targeted repair, and verify reachability, failover and isolation.
- Recover spanning-tree, LACP, OSPF, BGP, VRF and first-hop faults using before-and-after evidence.
- Separate adjacency, route installation, next-hop reachability and application forwarding.
- Plan controlled changes with negative tests, rollback conditions and a clear operations handoff.
Skills
- ENCOR
- ENARSI
- Advanced routing
- Reading VPN and overlay design
- SD-WAN
- Automation
Courses
- Enterprise design and switching (6 lessons) — Build an evidence baseline, compare campus failure domains, and recover spanning-tree root placement and LACP bundles with explicit acceptance checks.
- Topology protection and routing (6 lessons) — Protect the campus topology, control OSPF participation and route advertisement, recover a stuck adjacency, and bound redistribution with loop controls.
- Routing policy and isolation (5 lessons) — Trace BGP next-hop resolution, test route and PBR policy, recover a VRF migration without tenant leaks, and verify first-hop failover.
- Services, assurance and automation (8 lessons) — Validate ACL and QoS intent, correlate telemetry, retain AAA recovery access, and distinguish SD-WAN transport health from overlay forwarding.
- ENARSI — Advanced Routing and Services (14 lessons) — Recover enterprise routing through forwarding analysis, routing policy, redistribution, EIGRP, OSPF, BGP and VRF isolation.
- Catalyst SD-WAN — Overlay and Controller Operations (12 lessons) — Follow the path from transport and controller trust through OMP, BFD, policy and application-aware routing to a controlled migration.
- Routing: EIGRP, OSPF and redistribution (21 lessons) — EIGRP and OSPF as the enterprise core exam asks for them: neighbours brought up on IPv4 and IPv6, DUAL's passive and active states, a successor told from a feasible successor, a single OSPF area's three tables, ABR and ASBR behaviour, summarisation, external types, stub areas and a virtual link — then redistribution one direction at a time with seed metrics, route maps, prefix lists and distribute-lists, and policy-based routing over a CEF forwarding path.
- Internet edge, BGP and overlay transport (22 lessons) — The internet edge and what rides over it: a default route and address translation at the boundary, IPv6 assignment decided by RA flags, BGP from an established session through the best-path order to aggregation with suppression and route reflectors, then overlay and shared-core transport — GRE with NHRP, label forwarding, per-customer VRFs, uRPF and BFD — ending on a troubleshooting method and maintenance planned before a failure forces it.
- Maintenance, switching and spanning tree (16 lessons) — Keeping a campus diagnosable and then switching it: log timestamps made comparable, the documentation diagnosis depends on, reachability, jitter and loss measured from the device, and a choice between polling, events, flows and capture — then VLANs and trunks, SVIs and a trunked subinterface gateway, three tiers against a collapsed core, link bundling and why one flow stays on one member, the risk a distributed VLAN database carries, and spanning tree from root election through RSTP to MST.
- First-hop redundancy, access control and switch services (19 lessons) — The services an access layer leans on: DHCP served or relayed by the switch, a virtual gateway with HSRP, VRRP or GLBP that fails over on a tracked dependency, AAA separated into its three parts with the 802.1X roles around it, clock strata, SNMP, discovery protocols, a power budget and a mirrored port, stacking and a supervisor switchover — then the port-level controls lined up together: port security, storm control, DHCP snooping trust, and hosts isolated inside one subnet.
- Wireless, multicast, automation and SD-Access (22 lessons) — A wide final module: wireless encryption after WEP and TKIP, then multicast group registration and reverse-path state, then the automation half — decisions moved to a controller, northbound told from southbound, REST with JSON read by hand, and configuration modelled in YANG and carried by NETCONF — and finally the fabric and security pieces around a software-defined campus: a capable underlay, separated endpoint identity, Ethernet stretched over a Layer 3 underlay, IPsec with GRE, and defences placed per point in the network.
- Quality of service and what an outage costs (5 lessons) — Five lessons closing the path: what bandwidth, latency, jitter and loss each cost, traffic classified once and marked for the rest of its journey, policing chosen against shaping for excess, and then the cost of an attack weighed against confidentiality, integrity and availability.
Other learning paths
- Cisco CCNA: Wire It, Route It, Secure It
- Visual Modules: The CCNA, Drawn And Narrated
- Juniper JNCIA-Junos: One Candidate Config At A Time
- Arista EOS: Build The Switched Campus, Port By Port
- HPE Aruba AOS-CX: Campus Switching, Routed Both Ways
- Palo Alto PAN-OS: Everything Before You Touch Prod
- Fortinet FortiSwitch: Switching Under The Firewall's Thumb
- Linux For Network Engineers: The Shell Is The Interface
- Network Automation: Never Type The Same Change Twice
- Cloud Networking: Where The Packet Actually Goes
- Juniper Professional: Past The Associate, Into The Weeds
- Cisco CCNP Security: Lock Down What’s Already Live
- Cisco CCNP Data Center: Keep The Fabric Breathing
- BGP In Practice: The Protocol The Internet Runs On
- Enterprise Scenarios: Isolate The Fault, Then Defend The Call
- Network Security Engineer: Detect, Triage, Contain