Learning paths › CCNP Enterprise › Routing: EIGRP, OSPF and redistribution
Routing: EIGRP, OSPF and redistribution
EIGRP and OSPF as the enterprise core exam asks for them: neighbours brought up on IPv4 and IPv6, DUAL's passive and active states, a successor told from a feasible successor, a single OSPF area's three tables, ABR and ASBR behaviour, summarisation, external types, stub areas and a virtual link — then redistribution one direction at a time with seed metrics, route maps, prefix lists and distribute-lists, and policy-based routing over a CEF forwarding path.
Lessons
- Pick the core and concentration exams that pair
- Read what an exam question actually asks for
- See where hop count picks the wrong path
- Bring up EIGRP neighbours on IPv4 and IPv6
- Read passive and active as DUAL states
- Configure EIGRP under named address families
- Tell a successor from a feasible successor
- Build one OSPF area and read its three tables
- Split OSPF at an ABR and at an ASBR
- Summarise inter-area and external routes tightly
- Inject externals as Type 2 with a seed cost
- Add E1 externals, stub areas and a virtual link
- Run OSPF over IPv6 link-local addresses
- Decide when a second protocol earns its place
- Redistribute in one direction at a time
- Set a seed metric at the protocol boundary
- Tag and meter routes with a route map
- Filter updates with prefix lists and distribute-lists
- Forward packets without CPU work per packet
- Route on source and port with PBR
- Send one client's ports out a chosen ISP
More in CCNP Enterprise
- Enterprise design and switching
- Topology protection and routing
- Routing policy and isolation
- Services, assurance and automation
- ENARSI — Advanced Routing and Services
- Catalyst SD-WAN — Overlay and Controller Operations
- Internet edge, BGP and overlay transport
- Maintenance, switching and spanning tree
- First-hop redundancy, access control and switch services
- Wireless, multicast, automation and SD-Access
- Quality of service and what an outage costs