Changing the Trunk Native VLAN
Move a trunk’s native VLAN off VLAN 1 to an unused VLAN, as a hardening step.
Objectives
- Create VLAN 88 named 'NATIVE-UNUSED'.
- Keep GigabitEthernet0/1 a trunk and set its native VLAN to 88.
A hands-on Cisco CLI lab that runs in your browser.
More free labs
- VLAN Creation & Naming
- VLAN Trunking Mode
- EtherChannel LACP Clustering
- EtherChannel PAgP Clustering
- Spanning-Tree (STP) Basics
- Rapid Spanning-Tree (RSTP)
- STP Root Bridge Election
- Switchport Port Security
- Switch Management VLAN
- Configure an Entire Floor (Router + Switch)
- Layer 3 EtherChannel Bundle
- LACP Passive Mode Bundling
- Static EtherChannel With Mode On
- Multiple Spanning Tree Mode
- Root Bridge Primary and Secondary
- Access and Trunk Ports on One Switch
- Four Departmental VLANs
- Assigning Access Ports to a VLAN
- Hard-Coding Interface Speed and Duplex
- Switch Management VLAN and Default Gateway
- Rapid PVST With Deliberate Root Placement