Static EtherChannel With Mode On
Bundle two ports towards a storage appliance that does not speak LACP or PAgP.
Objectives
- Put FastEthernet0/21 into channel-group 5 with mode on.
- Put FastEthernet0/22 into channel-group 5 with mode on.
A hands-on Cisco CLI lab that runs in your browser.
More free labs
- VLAN Creation & Naming
- VLAN Trunking Mode
- EtherChannel LACP Clustering
- EtherChannel PAgP Clustering
- Spanning-Tree (STP) Basics
- Rapid Spanning-Tree (RSTP)
- STP Root Bridge Election
- Switchport Port Security
- Switch Management VLAN
- Configure an Entire Floor (Router + Switch)
- Layer 3 EtherChannel Bundle
- LACP Passive Mode Bundling
- Multiple Spanning Tree Mode
- Root Bridge Primary and Secondary
- Access and Trunk Ports on One Switch
- Changing the Trunk Native VLAN
- Four Departmental VLANs
- Assigning Access Ports to a VLAN
- Hard-Coding Interface Speed and Duplex
- Switch Management VLAN and Default Gateway
- Rapid PVST With Deliberate Root Placement