EtherChannel LACP Clustering
Bundle two uplinks into one LACP port channel and make the bundle the trunk.
Objectives
- Put GigabitEthernet0/1 into channel-group 1 using LACP active mode.
- Put GigabitEthernet0/2 into the same channel-group in LACP active mode.
- Configure the resulting Port-channel1 as an 802.1Q trunk.
A hands-on Cisco CLI lab that runs in your browser.
More free labs
- VLAN Creation & Naming
- VLAN Trunking Mode
- EtherChannel PAgP Clustering
- Spanning-Tree (STP) Basics
- Rapid Spanning-Tree (RSTP)
- STP Root Bridge Election
- Switchport Port Security
- Switch Management VLAN
- Configure an Entire Floor (Router + Switch)
- Layer 3 EtherChannel Bundle
- LACP Passive Mode Bundling
- Static EtherChannel With Mode On
- Multiple Spanning Tree Mode
- Root Bridge Primary and Secondary
- Access and Trunk Ports on One Switch
- Changing the Trunk Native VLAN
- Four Departmental VLANs
- Assigning Access Ports to a VLAN
- Hard-Coding Interface Speed and Duplex
- Switch Management VLAN and Default Gateway
- Rapid PVST With Deliberate Root Placement