Projects › Arista Top-of-Rack Static Routing to the Distribution Router
Arista Top-of-Rack Static Routing to the Distribution Router
Brightwire Hosting's rack A1 has two web servers on an Arista top-of-rack switch (TOR-A1) and a routed uplink to the distribution router (DIST-RTR, Cisco), behind which the monitoring server sits (10.51.0.0/24). Give the rack its own VLAN and gateway on TOR-A1, address both ends of the uplink (172.19.0.0/30), add a route each way, and prove both web servers reach the monitoring server.
Difficulty: intermediate · Time: about 45 minutes
Why it matters
Routed access pushes Layer 3 down to the rack: the rack is one VLAN with its gateway on the ToR, and everything between racks is routed, so spanning tree never spans racks. Static routing is the simplest way to see the pattern before a routing protocol automates it.
Technologies
- Arista EOS
- SVIs
- Routed Interfaces
- Static Routing
- Top-of-Rack
Related projects
- Data Center Spine-Leaf Fabric with VXLAN and BGP EVPN
- Two-Site Data Center Interconnect with EVPN Multi-Site
- Underlay Multicast for a VXLAN Fabric: PIM, Anycast RP and VNI Groups
- Arista eBGP Underlay: Two Leaves Through a Spine
- Arista EOS Top-of-Rack VLANs for a vSphere Cluster
- Arista EOS Routed Interfaces and Single-Area OSPF
- Arista Three-Router OSPF Underlay for a Colocation Cage
- Arista EOS Routed Link Between Studio and Playout