Projects › Data Center Spine-Leaf Fabric with VXLAN and BGP EVPN
Data Center Spine-Leaf Fabric with VXLAN and BGP EVPN
A SaaS company is moving from a three-tier data centre with stretched VLANs to a two-spine, four-leaf Clos fabric. Its virtualisation team needs VLAN 100 (app tier) on every leaf with the same gateway everywhere, so VMs can move between racks without readdressing; the network team wants no spanning tree between switches. Design the fabric on NX-OS: a /31 eBGP underlay with jumbo MTU, VTEP loopbacks, an MP-BGP EVPN overlay through the spines, and a distributed anycast gateway for VLAN 100 on VNI 10100.
Difficulty: expert · Time: about 90 minutes
Why it matters
VXLAN EVPN is how modern data centres run Layer 2 as an overlay on a routed underlay: every spine link carries traffic through ECMP, and a workload keeps its address wherever it moves. It is CCNP Data Center and CCIE DC material, and the design decisions (eBGP spines that are not route reflectors, next-hop handling, MTU) are what interviews probe.
Technologies
- VXLAN
- BGP EVPN
- Spine-Leaf Architecture
- Clos Fabric
- VTEPs
- Anycast Gateway
Related projects
- Two-Site Data Center Interconnect with EVPN Multi-Site
- Underlay Multicast for a VXLAN Fabric: PIM, Anycast RP and VNI Groups
- Arista eBGP Underlay: Two Leaves Through a Spine
- Arista EOS Top-of-Rack VLANs for a vSphere Cluster
- Arista EOS Routed Interfaces and Single-Area OSPF
- Arista Top-of-Rack Static Routing to the Distribution Router
- Arista Three-Router OSPF Underlay for a Colocation Cage
- Arista EOS Routed Link Between Studio and Playout