Projects › Arista EOS Routed Interfaces and Single-Area OSPF
Arista EOS Routed Interfaces and Single-Area OSPF
Quillon Markets is replacing the Layer 2 link between its trading-floor switch (ARISTA-1, traders on 10.10.1.0/24) and its market-data switch (ARISTA-2, feed handlers on 10.10.2.0/24) with a routed link. Make both switches route, address the /30 between them (10.254.1.0/30) and the two LANs, and run OSPF area 0 with fixed router IDs and passive LAN interfaces.
Difficulty: intermediate · Time: about 45 minutes
Why it matters
A routed point-to-point link has no spanning tree: nothing is blocked, and a failure is handled by the routing protocol rather than by STP reconvergence. Fixed router IDs make adjacencies and logs readable, and passive LAN interfaces keep OSPF hellos off the trading desks.
Technologies
- Arista EOS
- Routed Interfaces
- OSPFv2
- OSPF Area 0
- Passive Interfaces
Related projects
- Data Center Spine-Leaf Fabric with VXLAN and BGP EVPN
- Two-Site Data Center Interconnect with EVPN Multi-Site
- Underlay Multicast for a VXLAN Fabric: PIM, Anycast RP and VNI Groups
- Arista eBGP Underlay: Two Leaves Through a Spine
- Arista EOS Top-of-Rack VLANs for a vSphere Cluster
- Arista Top-of-Rack Static Routing to the Distribution Router
- Arista Three-Router OSPF Underlay for a Colocation Cage
- Arista EOS Routed Link Between Studio and Playout