Projects › Underlay Multicast for a VXLAN Fabric: PIM, Anycast RP and VNI Groups
Underlay Multicast for a VXLAN Fabric: PIM, Anycast RP and VNI Groups
A broadcaster's data-centre fabric (two spines, four leafs, VXLAN EVPN) uses ingress replication today, and the playout VLANs are flooding enough BUM traffic to load the leafs' uplinks. The design team wants the underlay to carry BUM traffic as multicast instead, with no single point of failure for the rendezvous point. Design it on NX-OS: PIM sparse mode on every fabric link, an anycast RP shared by both spines (RFC 4610, no MSDP), each VNI mapped to an underlay multicast group, and IGMP snooping for tenant receivers.
Difficulty: expert · Time: about 75 minutes
Why it matters
Multicast underlays are how large VXLAN fabrics replicate broadcast, unknown-unicast and multicast traffic efficiently, and media, trading and broadcast networks depend on multicast for their own traffic too. Anycast RP and the VNI-to-group mapping are the parts most often got wrong.
Technologies
- Multicast
- PIM Sparse-Mode
- Anycast-RP
- VXLAN
- IGMP Snooping
Related projects
- Data Center Spine-Leaf Fabric with VXLAN and BGP EVPN
- Two-Site Data Center Interconnect with EVPN Multi-Site
- Arista eBGP Underlay: Two Leaves Through a Spine
- Arista EOS Top-of-Rack VLANs for a vSphere Cluster
- Arista EOS Routed Interfaces and Single-Area OSPF
- Arista Top-of-Rack Static Routing to the Distribution Router
- Arista Three-Router OSPF Underlay for a Colocation Cage
- Arista EOS Routed Link Between Studio and Playout