Projects › Arista eBGP Underlay: Two Leaves Through a Spine
Arista eBGP Underlay: Two Leaves Through a Spine
Corvid Analytics is building its first rack pair: LEAF1 serves the application rack (VLAN 10, 10.10.1.0/24, gateway already on Vlan10) and LEAF2 the database rack (10.10.2.0/24), both cabled to SPINE1. All three are Arista 7050s. Build the routed fabric the standard way: a /30 per leaf-spine link, one private AS per switch (spine 65000, leaves 65001 and 65002), eBGP on every link, and each leaf advertising its own rack subnet. A second spine (and ECMP across both) comes next quarter; this is the first half of that fabric.
Difficulty: intermediate · Time: about 55 minutes
Why it matters
Leaf-spine with eBGP is the default data-centre underlay because it scales by adding boxes, not by stretching VLANs: each leaf owns its subnet and announces it, and the spine just routes. Getting one leaf-spine-leaf path right, with each switch in its own AS, is the pattern the whole fabric repeats.
Technologies
- Arista EOS
- eBGP
- Leaf-Spine Fabric
- Routed Interfaces
- Layer 3 Switching
Related projects
- Data Center Spine-Leaf Fabric with VXLAN and BGP EVPN
- Two-Site Data Center Interconnect with EVPN Multi-Site
- Underlay Multicast for a VXLAN Fabric: PIM, Anycast RP and VNI Groups
- Arista EOS Top-of-Rack VLANs for a vSphere Cluster
- Arista EOS Routed Interfaces and Single-Area OSPF
- Arista Top-of-Rack Static Routing to the Distribution Router
- Arista Three-Router OSPF Underlay for a Colocation Cage
- Arista EOS Routed Link Between Studio and Playout