Device Management lab practice
Read the configuration and software version, save changes, discover neighbors with CDP and LLDP, and check logging and time.
6 labs · 7 lessons · 9 commands · 2 projects
Day-to-day operation of a Cisco device: knowing what it is running, what its configuration is, whether that configuration is saved, what it is connected to, and what it has logged.
These are also the commands you run first on any unfamiliar device, before changing anything.
Hands-on labs
- Switch Management VLAN (free)
- Switch Management VLAN and Default Gateway (free)
- Syslog & NTP Integration (Pro)
- NTP and Syslog Together (Pro)
- SNMP Configuration (Pro)
- CDP & LLDP Neighbor Discovery (Pro)
Lessons, in order
- Cisco CLI Commands Sheet (2. Network Access, 17 min)
- Device Discovery (CDP & LLDP) (2. Network Access, 12 min)
- Network Time Protocol (NTP) (4. IP Services, 9 min)
- Simple Network Management Protocol (4. IP Services, 12 min)
- Syslog Operations & Severity Levels (4. IP Services, 11 min)
- Trace clock accuracy back through the strata (Prerequisite review: CCNA topics from the CCNP courses, 9 min)
- Learn what is on the other end of a link (Prerequisite review: CCNA topics from the CCNP courses, 7 min)
Commands
- show running-config — Shows the configuration the device is running right now, including changes that have not been saved.
- show startup-config — Shows the configuration saved in NVRAM, which is what the device loads the next time it boots.
- show version — Shows the software version, uptime, image file, memory, interface count and configuration register.
- show cdp neighbors — Lists directly connected Cisco devices discovered with CDP: device ID, local and remote port, capability and platform.
- show cdp neighbors detail — Shows each CDP neighbor in full, including its management IP address and software version.
- show lldp neighbors — Lists directly connected devices discovered with the vendor-neutral LLDP protocol.
- show logging — Shows the logging configuration for each destination and the messages held in the local log buffer.
- show ntp associations — Lists the NTP servers the device is polling, their stratum and reachability, and which one it is synchronised to.
- show ip interface brief — Lists every interface with its IPv4 address and its Layer 1 and Layer 2 status in one line each.
Related projects
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow — Implement monitoring across the core routers and switches: SNMPv3 in authPriv mode (SHA/AES), remote syslog to a central collector, and Flexible NetFlow exporting version 9 records.
- Secure Network Device Administration — An insurance audit at Brookfield Credit Union found its edge router still managed over Telnet with a shared password. Fix the front door: SSH only, named accounts with hashed passwords, an enable secret, and a banner that warns rather than welcomes.