CCNA topics
16 topics, each gathering the hands-on labs, CCNA lessons, commands and portfolio projects on BuildTheNet that practise it.
- Switching Basics — How a switch learns MAC addresses, how to read interface status, and how to fix speed, duplex and administratively down ports. (8 labs, 10 lessons, 6 commands)
- VLANs — Create and name VLANs, assign access ports, and read the VLAN table to prove each port is in the broadcast domain you intended. (4 labs, 14 lessons, 5 commands)
- 802.1Q Trunking — Carry several VLANs over one link with 802.1Q, control the allowed list and native VLAN, and diagnose trunks that will not form. (4 labs, 11 lessons, 4 commands)
- Spanning Tree (STP) — Keep redundant switch links without a Layer 2 loop: root bridge election, port roles and states, Rapid PVST+, PortFast and BPDU Guard. (7 labs, 10 lessons, 4 commands)
- EtherChannel — Bundle parallel links into one logical port with LACP, PAgP or static mode, and read the summary flags to find a member that did not join. (5 labs, 10 lessons, 4 commands)
- Port Security — Limit which MAC addresses an access port accepts, choose a violation action, learn sticky addresses and recover err-disabled ports. (5 labs, 9 lessons, 8 commands)
- Static Routing — Read the routing table, add static and default routes in both directions, and prove reachability with ping and traceroute. (7 labs, 11 lessons, 6 commands)
- OSPF — Enable single-area OSPFv2, form neighbor adjacencies, read the neighbor and interface tables and confirm learned routes. (7 labs, 11 lessons, 7 commands)
- Access Control Lists (ACLs) — Write standard, extended and named ACLs, apply them in the right direction on the right interface, and read their match counters. (12 labs, 8 lessons, 3 commands)
- NAT and PAT — Translate private addresses at the edge with static NAT, dynamic pools and PAT overload, and read the translation table. (7 labs, 4 lessons, 4 commands)
- DHCP — Run a DHCP server on a router, relay requests across subnets with ip helper-address, and protect the LAN with DHCP snooping. (7 labs, 6 lessons, 5 commands)
- SSH and Device Hardening — Replace Telnet with SSH: domain name, RSA keys, local users, VTY transport and login rules, and how to verify each one. (7 labs, 9 lessons, 5 commands)
- IPv6 — Enable IPv6 routing, address interfaces with global, link-local and EUI-64 addresses, and add IPv6 static routes. (12 labs, 4 lessons, 3 commands)
- Inter-VLAN Routing — Route between VLANs with router-on-a-stick subinterfaces or switch virtual interfaces, and verify each VLAN has a working gateway. (4 labs, 4 lessons, 4 commands)
- HSRP (First-Hop Redundancy) — Give hosts a virtual default gateway shared by two routers, control which one is active with priority and preemption, and verify failover. (4 labs, 0 lessons, 2 commands)
- Device Management — Read the configuration and software version, save changes, discover neighbors with CDP and LLDP, and check logging and time. (6 labs, 7 lessons, 9 commands)