Projects › Haulage Firm Hub-and-Spoke Static Routing
Haulage Firm Hub-and-Spoke Static Routing
A haulage firm has a head office and two depots, each with its own router and LAN, connected head office to depot over two metro Ethernet circuits. The routers are cabled and nothing is configured; the depots cannot reach the dispatch server at head office or each other. Address the routers from the plan, give each depot a single default route to head office, give head office a route to each depot LAN, and prove depot-to-depot traffic crosses the head office router.
Difficulty: intermediate · Time: about 45 minutes
Why it matters
Hub-and-spoke is the simplest multi-site design, and static routing is still how many small companies run it. The skill is knowing which router needs which route: stub sites need one default, the hub needs one route per spoke, and a route in the wrong place or with the wrong mask causes the faults that take longest to find.
Technologies
- Static Routing
- Default Route
- Hub-and-Spoke
- IP Addressing
Related projects
- Multi-Area OSPFv2 Network with Area 0 Backbone & Stub Routing
- Branch-to-Cloud WAN Fabric Deployment via Cisco SD-WAN
- Route-Based Site-to-Site VPN: Tunnel Interface and eBGP, with IKEv2 Design
- WAN-Edge QoS for Voice and Video: Classify, Queue, Apply
- Cisco SD-WAN Direct Internet Access (DIA) with Enterprise Firewall
- Dual-Circuit Branch: Floating Static Failover with a Pinned Probe Route
- DMVPN Phase 3: Hub-and-Spoke with On-Demand Spoke-to-Spoke Tunnels
- EIGRP for a Three-Store Retailer: Authenticated Peering and Stub Branches