Projects › DMVPN Phase 3: Hub-and-Spoke with On-Demand Spoke-to-Spoke Tunnels
DMVPN Phase 3: Hub-and-Spoke with On-Demand Spoke-to-Spoke Tunnels
A retail chain's 40 stores reach head office over internet IPsec tunnels, one per store, all configured by hand. Video calls between stores hairpin through head office and suffer. Head office's hub router has a public address of 198.51.100.1; each store has a dynamic address from its ISP. Design DMVPN Phase 3: one mGRE interface on the hub, NHRP registration from every spoke, IPsec protection, EIGRP over the tunnel, and redirect and shortcut so stores build direct tunnels on demand.
Difficulty: advanced · Time: about 65 minutes
Why it matters
DMVPN is still widely deployed and is the conceptual basis of most SD-WAN overlays. Phase 3 (redirect and shortcut) is what makes spoke-to-spoke traffic direct while keeping routing simple, and NHRP is what most DMVPN faults come down to.
Technologies
- DMVPN Phase 3
- mGRE
- NHRP
- IPsec
- EIGRP
Related projects
- Multi-Area OSPFv2 Network with Area 0 Backbone & Stub Routing
- Branch-to-Cloud WAN Fabric Deployment via Cisco SD-WAN
- Route-Based Site-to-Site VPN: Tunnel Interface and eBGP, with IKEv2 Design
- WAN-Edge QoS for Voice and Video: Classify, Queue, Apply
- Cisco SD-WAN Direct Internet Access (DIA) with Enterprise Firewall
- Dual-Circuit Branch: Floating Static Failover with a Pinned Probe Route
- EIGRP for a Three-Store Retailer: Authenticated Peering and Stub Branches
- Small Office Internet Gateway with NAT Overload (PAT)