Projects › WAN-Edge QoS for Voice and Video: Classify, Queue, Apply
WAN-Edge QoS for Voice and Video: Classify, Queue, Apply
A branch office's calls break up every afternoon when the nightly backups to head office start early. The branch router BR-EDGE connects to the provider on a 1 Gb/s port with a 100 Mb/s contract (CIR). Phones mark their traffic EF, video endpoints AF41 and call setup CS3. Build the egress QoS policy on BR-EDGE: classify the three traffic types, give voice a strict-priority queue sized to the contract, guarantee video and signalling a share, and apply it where queuing actually happens. Then design the shaper and the trust boundary the sandbox cannot run.
Difficulty: advanced · Time: about 50 minutes
Why it matters
QoS questions come up in every voice or video rollout and in CCNP ENCOR. The traps are always the same: a policy applied in the wrong direction, a priority queue so large it starves everything else, and a 1 Gb/s port that never congests because the 100 Mb/s limit is enforced by the provider instead of by you.
Technologies
- QoS
- DSCP
- Low Latency Queuing (LLQ)
- Class-Based Weighted Fair Queuing (CBWFQ)
- Traffic Shaping
Related projects
- Multi-Area OSPFv2 Network with Area 0 Backbone & Stub Routing
- Branch-to-Cloud WAN Fabric Deployment via Cisco SD-WAN
- Route-Based Site-to-Site VPN: Tunnel Interface and eBGP, with IKEv2 Design
- Cisco SD-WAN Direct Internet Access (DIA) with Enterprise Firewall
- Dual-Circuit Branch: Floating Static Failover with a Pinned Probe Route
- DMVPN Phase 3: Hub-and-Spoke with On-Demand Spoke-to-Spoke Tunnels
- EIGRP for a Three-Store Retailer: Authenticated Peering and Stub Branches
- Small Office Internet Gateway with NAT Overload (PAT)