Projects › Dual-Circuit Branch: Floating Static Failover with a Pinned Probe Route
Dual-Circuit Branch: Floating Static Failover with a Pinned Probe Route
A small branch has a fibre circuit and a cheaper DSL backup from the same provider. The provider routes the branch's /29 (203.0.113.8/29) to the fibre, and to the DSL only when the fibre is gone. Today BR-RTR has no default route at all. Make the fibre primary and the DSL a floating backup, pin the route to the provider's resolver so a health probe can only ever measure the fibre, prove the failover, and design the IP SLA and tracking that would also catch a fibre circuit that is up but not passing traffic.
Difficulty: intermediate · Time: about 45 minutes
Why it matters
Most small sites cannot run BGP, so two static defaults and a probe are how they get resilience. The /32 pin is the detail that separates a working design from one that flaps: without it the probe succeeds over the backup and keeps re-installing a dead primary.
Technologies
- Static Routing
- Floating Static Routes
- Administrative Distance
- IP SLA
- Object Tracking
Related projects
- Multi-Area OSPFv2 Network with Area 0 Backbone & Stub Routing
- Branch-to-Cloud WAN Fabric Deployment via Cisco SD-WAN
- Route-Based Site-to-Site VPN: Tunnel Interface and eBGP, with IKEv2 Design
- WAN-Edge QoS for Voice and Video: Classify, Queue, Apply
- Cisco SD-WAN Direct Internet Access (DIA) with Enterprise Firewall
- DMVPN Phase 3: Hub-and-Spoke with On-Demand Spoke-to-Spoke Tunnels
- EIGRP for a Three-Store Retailer: Authenticated Peering and Stub Branches
- Small Office Internet Gateway with NAT Overload (PAT)