Projects › Aruba CX Branch Gateway with a Single Static Default Path
Aruba CX Branch Gateway with a Single Static Default Path
Greenacre Garden Centres' newest branch has an Aruba CX (BRANCH-CX) as its gateway and one link to the head office Cisco router (HO-RTR, 172.18.0.0/30), behind which the stock server lives (10.7.0.0/24). The tills are in VLAN 10 (10.6.0.0/24). Build the branch gateway, address head office's end, give the branch a default route and head office a specific route back, and prove a till reaches the stock server.
Difficulty: foundation · Time: about 40 minutes
Why it matters
With one way out, a default route is the right answer; a routing protocol on a single-homed branch is extra configuration that can only fail. Head office, which has many branches, needs a specific route to each, so the two ends are deliberately asymmetric.
Technologies
- ArubaOS-CX
- Cisco IOS
- Default Route
- Static Routing
- SVIs
Related projects
- Multi-Area OSPFv2 Network with Area 0 Backbone & Stub Routing
- Branch-to-Cloud WAN Fabric Deployment via Cisco SD-WAN
- Route-Based Site-to-Site VPN: Tunnel Interface and eBGP, with IKEv2 Design
- WAN-Edge QoS for Voice and Video: Classify, Queue, Apply
- Cisco SD-WAN Direct Internet Access (DIA) with Enterprise Firewall
- Dual-Circuit Branch: Floating Static Failover with a Pinned Probe Route
- DMVPN Phase 3: Hub-and-Spoke with On-Demand Spoke-to-Spoke Tunnels
- EIGRP for a Three-Store Retailer: Authenticated Peering and Stub Branches