Projects › Junos Two-Site Static Routing with routing-options
Junos Two-Site Static Routing with routing-options
Ashgrove Photography runs a Junos SRX at its high-street shop (SHOP-SRX, LAN 10.3.0.0/24) and another at the studio (STUDIO-SRX, LAN 10.4.0.0/24, where the proofing NAS lives), joined by a leased line (172.17.0.0/30). Shop staff need to pull proofs from the NAS. Address both routers, add a static route in each direction, commit both and prove it. The lab SRX forwards in packet-based mode, so no zones are needed here.
Difficulty: foundation · Time: about 40 minutes
Why it matters
Junos keeps static routes under routing-options rather than as top-level lines, and does nothing until each router is committed. The routing is the same as IOS; a two-site build with both directions and both commits is where the habits are formed.
Technologies
- Juniper Junos
- Static Routing
- Junos Commit Model
- Point-to-Point Links
Related projects
- Multi-Area OSPFv2 Network with Area 0 Backbone & Stub Routing
- Branch-to-Cloud WAN Fabric Deployment via Cisco SD-WAN
- Route-Based Site-to-Site VPN: Tunnel Interface and eBGP, with IKEv2 Design
- WAN-Edge QoS for Voice and Video: Classify, Queue, Apply
- Cisco SD-WAN Direct Internet Access (DIA) with Enterprise Firewall
- Dual-Circuit Branch: Floating Static Failover with a Pinned Probe Route
- DMVPN Phase 3: Hub-and-Spoke with On-Demand Spoke-to-Spoke Tunnels
- EIGRP for a Three-Store Retailer: Authenticated Peering and Stub Branches