Projects › Multi-Vendor Branch Edge: Juniper SRX WAN Gateway with a Cisco ISR LAN Router
Multi-Vendor Branch Edge: Juniper SRX WAN Gateway with a Cisco ISR LAN Router
Northfield Freight's depot is replacing its WAN router with an SRX300 (BR-SRX) but keeping the existing Cisco ISR (BR-ISR) as the LAN router for the depot clerks (192.168.50.0/24). The SRX takes the WAN circuit to head office (HQ-WAN, already configured on 10.255.0.0/30 with a route back to the depot) and a /30 transit (10.50.0.0/30) to the ISR. The depot must reach the HQ ERP server, and nothing at head office may open a connection into the depot.
Difficulty: intermediate · Time: about 55 minutes
Why it matters
Mixed-vendor edges are normal after a refresh: the firewall changes, the LAN router stays. The routing is plain static on both sides, written in two syntaxes; the security is the SRX's, and a policy written only for the outbound direction is exactly what keeps head office out.
Technologies
- Juniper Junos
- Cisco IOS
- Multi-Vendor
- Static Routing
- Zone-Based Security
Related projects
- Multi-Area OSPFv2 Network with Area 0 Backbone & Stub Routing
- Branch-to-Cloud WAN Fabric Deployment via Cisco SD-WAN
- Route-Based Site-to-Site VPN: Tunnel Interface and eBGP, with IKEv2 Design
- WAN-Edge QoS for Voice and Video: Classify, Queue, Apply
- Cisco SD-WAN Direct Internet Access (DIA) with Enterprise Firewall
- Dual-Circuit Branch: Floating Static Failover with a Pinned Probe Route
- DMVPN Phase 3: Hub-and-Spoke with On-Demand Spoke-to-Spoke Tunnels
- EIGRP for a Three-Store Retailer: Authenticated Peering and Stub Branches