Projects › Multi-Area OSPF for a Four-Building Hospital
Multi-Area OSPF for a Four-Building Hospital
A hospital campus has a data-centre core (CORE1 and CORE2, hosting the EHR and imaging servers) and four buildings, each with an area border router dual-homed to both cores and a floor router serving its wards. Everything is cabled and addressed; nothing routes. Design and build multi-area OSPF: area 0 in the core, one area per building, stable router IDs, passive host LANs, and inter-area reachability that keeps a fault in one building out of every other building's SPF run.
Difficulty: advanced · Time: about 90 minutes
Why it matters
Multi-area OSPF is core CCNP ENARSI material and still the most common enterprise IGP. Areas exist to contain change: a flapping ward switch should not make every router on the campus recalculate. Being able to explain why an O IA route exists, and where it came from, is the standard OSPF interview question.
Technologies
- OSPFv2
- Multi-Area OSPF
- OSPF Area 0
- ABR
- Passive Interfaces
- Router ID
- Stub Areas
- Route Summarization
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture