Projects › Campus Gateway High Availability with HSRPv2 and Uplink Tracking
Campus Gateway High Availability with HSRPv2 and Uplink Tracking
A call centre lost its phones for ten minutes last quarter when its only gateway switch rebooted. Phase 2 of the campus project adds the second gateway: CORE-01 and CORE-02 already route VLAN 10 (staff) and VLAN 20 (call centre) with addresses .2 and .3, each has its own routed uplink to EDGE, and every host already points at .1, which nobody answers yet. Build HSRPv2 so CORE-01 is the primary gateway, make a core failure cost the phones no more than one second, and make the gateway move when CORE-01 loses its uplink, not only when it dies.
Difficulty: advanced · Time: about 60 minutes
Why it matters
First-hop redundancy is standard in every campus, and the questions are always the same: what happens when a switch dies, and what happens when it is alive but cut off? Measured failover and tracked priorities are the answer a design review wants.
Technologies
- HSRP
- First-Hop Redundancy
- Object Tracking
- IP SLA
- SVIs
- Redundancy
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture
- Small Office DHCP with a Reserved Range for Printers and Servers