Projects › Small Office DHCP with a Reserved Range for Printers and Servers
Small Office DHCP with a Reserved Range for Printers and Servers
A 30-person legal practice keeps getting "duplicate address" errors: visiting laptops are being leased the same addresses the printer and file server use. The router (OFFICE-RTR) is unconfigured and the internet line is not yet connected. Set up the LAN gateway, reserve the low range for fixed devices, run a DHCP pool that hands out the right gateway and DNS server, and bring the internet line up with PAT.
Difficulty: foundation · Time: about 35 minutes
Why it matters
Address conflicts are one of the most common small-office tickets, and the cause is almost always a DHCP scope that overlaps static addresses. Planning the range before turning DHCP on is the habit that prevents them.
Technologies
- DHCP
- Static Addressing
- NAT
- PAT
- Default Route
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture