Projects › Campus High Availability: HSRP, Spanning Tree and a Failover Budget
Campus High Availability: HSRP, Spanning Tree and a Failover Budget
A community college has three dual-homed access switches and a pair of distribution switches that do nothing yet: hosts already point at 10.70.<vlan>.1, but nothing answers. The board approved a single requirement: losing either distribution switch must not interrupt classes for more than three seconds. Build the distribution layer with HSRP load-shared odd/even across the pair, spanning-tree roots aligned to the HSRP active switch per VLAN, preemption, and timers that meet the budget, then prove it by powering each switch off.
Difficulty: advanced · Time: about 90 minutes
Why it matters
Redundant distribution is the standard campus design, and "what happens when that switch dies?" is the question every design review asks. The answer has to be a measured number, not a diagram. Aligning the STP root with the HSRP active switch keeps traffic off the inter-switch link, and that is the detail interviewers listen for.
Technologies
- HSRP
- Spanning Tree
- Root Bridge Placement
- Inter-VLAN Routing
- SVIs
- 802.1Q Trunking
- Redundancy
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture