Projects › Campus Core Redesign: From Layer 2 to a Routed Core
Campus Core Redesign: From Layer 2 to a Routed Core
A contractor cabled a new campus core (two core switches, two distribution switches and a data-centre distribution switch) and left every link as a default switchport. The result is one VLAN 1 loop that spanning tree resolves by blocking paid-for links, and a single gateway for everyone. The access layer is already trunked to both distribution switches. Rebuild the core as routed point-to-point links running OSPF, with redundant gateways at distribution, so losing any one core link costs a user no more than a couple of seconds.
Difficulty: advanced · Time: about 90 minutes
Why it matters
A routed core is the standard enterprise campus design because it removes spanning tree from the core: every link forwards, failures are detected as carrier loss and rerouted by the routing protocol in about a second instead of tens of seconds. The skill being tested is not typing `no switchport` but showing, per link, what a failure costs. Hiring managers value that kind of measured outcome.
Technologies
- Routed Interfaces
- OSPFv2
- HSRP
- Layer 3 Switching
- Spanning Tree
- Campus Design
- Failover Testing
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture