Projects › Junos Three-Site Migration from Static Routes to OSPF
Junos Three-Site Migration from Static Routes to OSPF
Brightpath Trust runs offices in London, Leeds and Bristol on Junos SRXs in a line (London to Leeds on 172.26.0.0/30, Leeds to Bristol on 172.26.0.4/30). Every route between them was typed by hand, and a new Bristol subnet last month took a change request at all three sites. Replace the static routes with OSPF area 0: run OSPF on every interface with the office LANs passive, delete the static routes, commit, and prove London reaches the Bristol CRM server. The lab SRXs forward in packet-based mode, so no zones are needed.
Difficulty: intermediate · Time: about 55 minutes
Why it matters
Three sites in a line already need six static routes (each router needs the two LANs it is not attached to), and every new subnet adds more. OSPF replaces all of them with each router announcing what it owns. Deleting the statics matters: left in place, they win over OSPF (Junos static preference 5 beats OSPF's 10) and hide any OSPF fault until the day they are wrong.
Technologies
- Juniper Junos
- OSPFv2
- OSPF Area 0
- Passive Interfaces
- Junos Commit Model
- Migration
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture