Projects › Cisco Core and Arista Access Sharing OSPF Area 0
Cisco Core and Arista Access Sharing OSPF Area 0
Thistle Media's core router is a Cisco ISR (CORE-RTR, media servers on 10.92.0.0/24); its new edit suite switch is an Arista 7050 (ACCESS-7050, edit PCs on 10.93.0.0/24). They are joined by 172.23.0.0/30. Both must run OSPF area 0 and learn each other's LAN with no static routes, and the LANs must not hear OSPF hellos.
Difficulty: intermediate · Time: about 50 minutes
Why it matters
OSPF is an open standard, so a Cisco-Arista adjacency fails only when the configurations disagree: area, subnet mask, timers or MTU. The usual multi-vendor surprise is a syntax difference (wildcard masks on IOS, prefixes on EOS) that hides an area mismatch.
Technologies
- Multi-Vendor
- OSPFv2
- OSPF Area 0
- Cisco IOS
- Arista EOS
- Passive Interfaces
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture