Projects › Hotel Floor Switches: Moving the Spanning-Tree Root to the Core
Hotel Floor Switches: Moving the Spanning-Tree Root to the Core
A hotel has a core switch in the comms room (CORE-SW, with the property-management and guest-portal servers) and a switch in a cupboard on each of two floors, each floor uplinked to the core, with a riser cable between the two floors for redundancy. A contractor's test last month left the floor-1 switch at priority 4096 for both VLANs, so it became the root, and floor-2 traffic now detours through the floor-1 cupboard. Put the root back on the core, remove the contractor's override, make sure floor traffic goes straight to the core, and give every host port PortFast.
Difficulty: intermediate · Time: about 35 minutes
Why it matters
Letting spanning tree elect a root by accident is how traffic ends up crossing a cupboard switch with the oldest hardware in the building. Setting priority deliberately is a one-line fix with a large effect, and reading the root port is how you prove it.
Technologies
- Spanning Tree
- Root Bridge Placement
- PortFast
- Campus Design
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture