Projects › First Multi-Vendor Trunk: Cisco Access to Juniper Distribution
First Multi-Vendor Trunk: Cisco Access to Juniper Distribution
Kestrel Architects has bought a Juniper EX (DIST-EX) as its distribution switch; desks are still on a Cisco 2960 (ACCESS-2960). The design team (VLAN 70, 10.70.0.0/24) has a PC on the Cisco switch and the plotter server on the Juniper. Carry VLAN 70 across the Fa0/24 to ge-0/0/0 link and prove the PC reaches the plotter.
Difficulty: foundation · Time: about 40 minutes
Why it matters
802.1Q is a standard, not a vendor feature. The VLAN ID is what has to match; the name is local to each switch. The first time a trunk comes up between two vendors, most of the fear about mixed estates goes away.
Technologies
- Multi-Vendor
- 802.1Q Trunking
- VLANs
- Cisco IOS
- Juniper Junos
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture