Projects › Fixing the Default Gateway for a Three-Workstation Studio
Fixing the Default Gateway for a Three-Workstation Studio
An architecture studio's three workstations can see each other but cannot print to the plotter server, which sits on its own network behind the studio router. Nobody has ever set a gateway, the router's studio-side port was never addressed, and one workstation's address was typed with two octets swapped. Fix the router, the addressing and the gateways, and prove every workstation can reach the plotter server.
Difficulty: foundation · Time: about 20 minutes
Why it matters
A missing or wrong default gateway is the most common cause of "the network works but I can't reach anything" calls. The proof matters too: pinging the gateway only proves the local subnet; reaching something beyond the router is what proves the gateway works.
Technologies
- Default Gateway
- IPv4 Addressing
- Subnet Locality
- Host Configuration
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture