BuildTheNet

Opening your workspace

Your learning content and tools are loading.

Projects › Three-Vendor Enterprise Build: Juniper WAN Edge, Arista Core, Aruba Access

Three-Vendor Enterprise Build: Juniper WAN Edge, Arista Core, Aruba Access

Marlowe Engineering's new office has a Juniper SRX300 at the WAN edge (EDGE-SRX), an Arista 7050 as the routed core (CORE-7050) and an Aruba CX 6300 for desks (ACCESS-CX). Staff are in VLAN 10 (192.168.10.0/24), the test lab in VLAN 20 (192.168.20.0/24). Head office (HQ-WAN, configured) routes 192.168.0.0/16 back to the SRX. The core is the gateway for both VLANs; the SRX is the way out. Build all three and prove both VLANs reach the head office server. The lab SRX forwards in packet-based mode, so no zones are needed here.

Difficulty: intermediate · Time: about 75 minutes

Why it matters

Each vendor here does one job, and the build only works when the jobs line up: the Aruba carries the VLANs, the Arista routes them and points everything else at the SRX, and the SRX knows how to get back to them. Most multi-vendor faults are one of those three handoffs, not a vendor incompatibility.

Technologies

Related projects