Projects › Aruba CX Campus Core Gateway and Default Route to the Firewall
Aruba CX Campus Core Gateway and Default Route to the Firewall
Felton & Rye's office has an Aruba CX 6300 (CORE-CX) as its core and staff gateway, cabled on 1/1/1 to the perimeter firewall (PERIM-FW, 192.168.1.254, already routing back to the staff VLAN). Staff are in VLAN 10 (10.1.10.0/24) on port 1/1/10. Make 1/1/1 a routed port, build the staff gateway, add the default route, name the switch to the standard and save it, then prove staff reach the DMZ web server.
Difficulty: foundation · Time: about 40 minutes
Why it matters
The core switch routes between VLANs locally and sends everything else to the firewall, so a single default route is the whole routing table. On a 6300, ports are Layer 2 until "routing" makes them routed, and a configuration that is not saved is gone at the next power cut.
Technologies
- ArubaOS-CX
- Routed Interfaces
- SVIs
- Default Route
- Layer 3 Switching
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture