Projects › ArubaOS-CX Campus Access Switch with Department VLANs and an 802.1Q Uplink
ArubaOS-CX Campus Access Switch with Department VLANs and an 802.1Q Uplink
Hallam University is putting an Aruba CX 6300 (HALL-CX) in its new academic hall. The faculty office PC, a student lab PC and the HVAC sensor plug into 1/1/1, 1/1/2 and 1/1/3. The building distribution switch (BLDG-DIST, a Catalyst) already carries VLAN 10 FACULTY, 20 STUDENTS and 30 IOT on Fa0/24, with the grades server, the student portal and the building-management server on it. Build HALL-CX and prove each device reaches its server.
Difficulty: foundation · Time: about 35 minutes
Why it matters
AOS-CX writes port membership as "vlan access" and "vlan trunk allowed" inside the interface, not "switchport". The design point is the usual one: students must not share a broadcast domain with the grading system, and building IoT is the classic foothold for an attacker, so it gets a VLAN of its own.
Technologies
- ArubaOS-CX
- VLANs
- Access Ports
- 802.1Q Trunking
- Network Segmentation
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture