Projects › Acquisition Capstone: Merging a Juniper Site Into a Cisco Estate
Acquisition Capstone: Merging a Juniper Site Into a Cisco Estate
Acme Fabrication (Cisco) has acquired NewCo Design (Juniper). Before anyone decides which vendor stays, the joint project team needs a shared VLAN 60 (10.60.0.0/24) spanning both estates over the new fibre between ACME-SW Gi0/1 and NEWCO-EX xe-0/0/0, and the two head offices (Acme 10.1.0.0/24 behind ACME-RTR, NewCo 10.2.0.0/24 behind NEWCO-SRX) must reach each other over a new routed link (172.29.0.0/30). The lab SRX forwards in packet-based mode, so no zones are needed.
Difficulty: advanced · Time: about 75 minutes
Why it matters
Acquisitions are where multi-vendor skills stop being theoretical: the estate has to work as one network long before anybody decides which vendor wins. A bridged VLAN and a routed interconnect are the two ways to join networks, and each needs its own proof.
Technologies
- Multi-Vendor
- 802.1Q Trunking
- Static Routing
- Cisco IOS
- Juniper Junos
- Integration
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture