Projects › Final Capstone: Three Vendors, One Routed Path, End to End
Final Capstone: Three Vendors, One Routed Path, End to End
Linthorpe Councils share a service between two sites: Site A has a Cisco ISR (SITE-A-ISR, LAN 10.100.1.0/24), Site B an Arista 7050 (SITE-B-7050, LAN 10.100.2.0/24), and a shared-services Juniper SRX (TRANSIT-SRX) sits between them on 172.28.0.0/30 (A side) and 172.28.0.4/30 (B side). Nothing is configured, including the two PCs. Address every interface, route between the sites by any correct means, configure both hosts, and prove they reach each other. The lab SRX forwards in packet-based mode, so no zones are needed.
Difficulty: intermediate · Time: about 75 minutes
Why it matters
Everything in the multi-vendor track meets here: three syntaxes, routing in both directions and hosts that need gateways. There is no single new technique; the difficulty is that nothing forgives a mistake anywhere along the path, and finding the one hop that is wrong is the real skill.
Technologies
- Multi-Vendor
- Static Routing
- OSPFv2
- Cisco IOS
- Juniper Junos
- Arista EOS
Related projects
- Dual-Stack Collapsed-Core Campus with Per-VLAN Root Placement
- Campus Gateway High Availability with HSRPv2 and Uplink Tracking
- Campus Automation & Assurance Deployment via Catalyst Center
- Cross-Switch LACP EtherChannel & PortFast BPDU Guard
- Enterprise Wireless LAN with Catalyst 9800 WLC & FlexConnect
- Network Observability: Secure SNMPv3, Remote Syslog, and Flexible NetFlow
- IPv6-Only Multi-Area OSPFv3 for a Research Campus
- Capstone: Multi-Tier Global Enterprise Network Architecture