show ipv6 route
Shows the IPv6 routing table: connected, local, static and dynamically learned prefixes and their next hops.
Written by a working field network engineer · CCNA, Security+, CySA+
The IPv6 routing table. It reads like the IPv4 one, with two differences that confuse people at first: every route is printed on two lines, and there is a local (L) /128 for each address and an FF00::/8 multicast entry.
Example output
R1#show ipv6 route
IPv6 Routing Table - default - 6 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
B - BGP, R - RIP, H - NHRP, I1 - ISIS L1
I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary, D - EIGRP
EX - EIGRP external, ND - ND Default, NDp - ND Prefix, DCE - Destination
NDr - Redirect, O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1
OE2 - OSPF ext 2, ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
C 2001:DB8:10::/64 [0/0]
via GigabitEthernet0/0, directly connected
L 2001:DB8:10::1/128 [0/0]
via GigabitEthernet0/0, receive
C 2001:DB8:12::/64 [0/0]
via GigabitEthernet0/1, directly connected
L 2001:DB8:12::1/128 [0/0]
via GigabitEthernet0/1, receive
S 2001:DB8:20::/64 [1/0]
via 2001:DB8:12::2
L FF00::/8 [0/0]
via Null0, receiveReference output: hand-written in standard Cisco IOS format for this example network, not captured from a device.
Useful variants
show ipv6 route staticshow ipv6 route 2001:db8:20::21
What each column or field means
| Field | Meaning |
|---|---|
C / L | Connected prefix and the router’s own /128 address on it. |
S | Static route, with [AD/metric] as in IPv4. |
via 2001:DB8:12::2 | Next hop. A link-local next hop must also name the exit interface. |
FF00::/8 via Null0 | The multicast range, installed automatically. |
When it doesn’t look right
A static route with a link-local next hop is rejected.
Link-local addresses exist on every link, so name the interface too: ipv6 route 2001:db8:20::/64 Gi0/1 FE80::…
Only connected routes appear on a router with OSPFv3 configured.
Check that ipv6 unicast-routing is on, that the router has a router-id (OSPFv3 needs a 32-bit ID even on IPv6-only routers), and that ipv6 ospf <pid> area <id> is on each interface.
Related commands
Try it yourself
- IPv6 Global Static Routes (Pro)
- An IPv6 Static Route (Pro)
- An IPv6 Default Route (Pro)
- Several IPv6 Static Routes (Pro)
- IPv6 Dynamic OSPFv3 (Pro)
- Or build the example network in the free Sandbox
Learn it in the CCNA path
- Add static IPv6 routes through a next hop (3. IP Connectivity)
- Break an IPv6 static routing loop (3. IP Connectivity)
Topic
IPv6 — Enable IPv6 routing, address interfaces with global, link-local and EUI-64 addresses, and add IPv6 static routes.