BuildTheNet

Opening your workspace

Your learning content and tools are loading.

DHCP

show ip dhcp binding

Lists the addresses the router’s DHCP server has leased, to which client, and when each lease expires.

Written by a working field network engineer · CCNA, Security+, CySA+

The router’s DHCP server lease table: every address it has handed out, the client it went to, and when the lease runs out.

Example output

R1#show ip dhcp binding
Bindings from all pools not associated with VRF:
IP address          Client-ID/              Lease expiration        Type       State      Interface
                    Hardware address/
                    User name
192.168.10.11       0100.5079.6668.17       Nov 11 2026 09:14 AM    Automatic  Active     GigabitEthernet0/0
192.168.10.12       0100.5079.6668.18       Nov 11 2026 09:20 AM    Automatic  Active     GigabitEthernet0/0

Reference output: hand-written in standard Cisco IOS format for this example network, not captured from a device.

Useful variants

What each column or field means

FieldMeaning
IP addressThe leased address.
Client-ID / Hardware addressThe client identifier: usually 01 (Ethernet) followed by the client’s MAC address.
Lease expirationWhen the lease ends unless the client renews (at half the lease time).
TypeAutomatic (leased from the pool) or Manual (a reservation).

When it doesn’t look right

No bindings, and clients have 169.254.x.x addresses.

Requests are not reaching the server. Clients on another subnet need ip helper-address on their gateway interface; clients on the same subnet need the pool’s network to match the interface subnet.

Clients get an address but cannot leave the subnet.

The pool’s default-router is wrong or missing. It must be the gateway address on that subnet.

The first addresses conflict with printers or the router.

Exclude static addresses with ip dhcp excluded-address before clients lease them. show ip dhcp conflict lists detected clashes.

Related commands

Try it yourself

Learn it in the CCNA path

Topic

DHCP — Run a DHCP server on a router, relay requests across subnets with ip helper-address, and protect the LAN with DHCP snooping.

All 57 commands