show ip dhcp snooping binding
Lists the MAC-to-IP bindings DHCP snooping recorded from leases seen on untrusted ports.
Written by a working field network engineer · CCNA, Security+, CySA+
The binding table DHCP snooping builds by watching leases on untrusted ports. Dynamic ARP Inspection and IP Source Guard both use it, so a host missing from here will be dropped by those features.
Example output
SW1#show ip dhcp snooping binding
MacAddress IpAddress Lease(sec) Type VLAN Interface
------------------ --------------- ---------- ------------- ---- --------------------
00:50:79:66:68:17 192.168.10.11 86157 dhcp-snooping 10 FastEthernet0/1
00:50:79:66:68:18 192.168.10.12 86211 dhcp-snooping 10 FastEthernet0/2
Total number of bindings: 2Reference output: hand-written in standard Cisco IOS format for this example network, not captured from a device.
Useful variants
show ip dhcp snooping binding interface Fa0/1show ip dhcp snooping binding vlan 10
What each column or field means
| Field | Meaning |
|---|---|
MacAddress / IpAddress | The client and the address it was leased. |
Lease(sec) | Seconds left on the lease. |
Type | dhcp-snooping (learned) or static (added with ip dhcp snooping binding). |
VLAN / Interface | Where the client is connected. |
When it doesn’t look right
A host with a static IP is missing.
Expected: only DHCP leases are learned. If DAI or IP Source Guard is on, add a static binding or an ARP ACL for it.
The table is empty after a switch reload.
Bindings are lost on reload unless stored with ip dhcp snooping database. Clients reappear as they renew.
Related commands
Try it yourself
- A Complete Port Security Policy (Pro)
- Or build the example network in the free Sandbox
Learn it in the CCNA path
- DHCP Snooping Security (5. Security Fundamentals)
- Validate ARP with snooping bindings and bounded trust (5. Security Fundamentals)
Topic
DHCP — Run a DHCP server on a router, relay requests across subnets with ip helper-address, and protect the LAN with DHCP snooping.