BuildTheNet

Opening your workspace

Your learning content and tools are loading.

DHCP

show ip dhcp pool

Shows each DHCP pool’s size, how many addresses are leased and the address range it hands out.

Written by a working field network engineer · CCNA, Security+, CySA+

Shows each DHCP pool’s size and use: total addresses, how many are leased, and the next address it will offer. Use it to spot a pool that is running out.

Example output

R1#show ip dhcp pool

Pool LAN10 :
 Utilization mark (high/low)    : 100 / 0
 Subnet size (first/next)       : 0 / 0
 Total addresses                : 254
 Leased addresses               : 2
 Pending event                  : none
 1 subnet is currently in the pool :
 Current index        IP address range                    Leased addresses
 192.168.10.13        192.168.10.1     - 192.168.10.254    2

Reference output: hand-written in standard Cisco IOS format for this example network, not captured from a device.

Useful variants

What each column or field means

FieldMeaning
Total addressesUsable addresses in the pool’s network statement. Excluded addresses are still counted here.
Leased addressesAddresses currently leased.
Current indexThe next address the server will try to offer.
IP address rangeThe range defined by the pool’s network statement.

When it doesn’t look right

Leased addresses equals total minus exclusions.

The pool is exhausted. Shorten the lease (lease 0 8 for eight hours), enlarge the subnet, or clear stale bindings.

The pool exists but no clients ever get leases from it.

The pool’s network does not match the subnet of the interface (or relay giaddr) the requests arrive on, so the server never selects it.

Related commands

Try it yourself

Learn it in the CCNA path

Topic

DHCP — Run a DHCP server on a router, relay requests across subnets with ip helper-address, and protect the LAN with DHCP snooping.

All 57 commands