Projects › Inherited Network Security Audit and Remediation
Inherited Network Security Audit and Remediation
You have just taken over a small company network from an outgoing contractor: an internet edge router doing NAT, two access switches, users, a management station and a published web server. It works, and it is wide open. More than fifteen weaknesses are planted across the three devices, every one visible in `show running-config`. Find and fix them all without breaking the business: users still reach the web server and the internet, the internet still reaches the website on HTTPS, and the management station still manages every device.
Difficulty: advanced · Time: about 90 minutes
Why it matters
Hardening against a benchmark (the CIS Cisco IOS benchmark covers almost everything here) is a routine task for a new network engineer, and the hard part is not knowing the commands but fixing everything without an outage. This project grades both: each weakness fixed, and a regression suite of business flows that must still pass afterwards. That combination is what a change approval board looks for.
Technologies
- Device Hardening
- SSH
- Access Control Lists
- SNMP
- Port Security
- BPDU Guard
- Native VLAN
- Security Audit
Related projects
- Edge Security Zone & DMZ Inspection with FortiGate
- Layer 2 Defense: DHCP Snooping, DAI, and IP Source Guard
- Zero-Trust 802.1X Port Authentication & Dynamic VLANs with Cisco ISE
- Enterprise Cyber Attack & Defense: Mitigating L2/L3 Exploits
- IPv6 First-Hop Security for a Campus Rollout: RA Guard and DHCPv6 Guard
- Enterprise Device Administration: Centralized TACACS+ with Cisco ISE
- Zero Trust Network Access (ZTNA): Micro-Segmentation via Zscaler ZPA
- Next-Gen Firewall Deep Packet Inspection: SSL/TLS & IPS with FortiGate