Projects › Zero-Trust 802.1X Port Authentication & Dynamic VLANs with Cisco ISE
Zero-Trust 802.1X Port Authentication & Dynamic VLANs with Cisco ISE
After a contractor plugged a personal laptop into a meeting-room jack, Merrow Insurance is rolling out 802.1X. Use Cisco ISE as the RADIUS server: add the access switch as a network device, put compliant corporate laptops in VLAN 10, and send non-compliant ones to a remediation portal. The switch-side port commands are listed for you to apply and confirm; ISE does not see them.
Difficulty: advanced · Time: about 65 minutes
Why it matters
Identity-based access control prevents unauthorized devices from plugging into physical office wall jacks.
Technologies
- Cisco ISE
- 802.1X
- RADIUS (RFC 2865)
- EAP-TLS
- Dynamic VLAN Assignment
Related projects
- Edge Security Zone & DMZ Inspection with FortiGate
- Layer 2 Defense: DHCP Snooping, DAI, and IP Source Guard
- Enterprise Cyber Attack & Defense: Mitigating L2/L3 Exploits
- IPv6 First-Hop Security for a Campus Rollout: RA Guard and DHCPv6 Guard
- Enterprise Device Administration: Centralized TACACS+ with Cisco ISE
- Zero Trust Network Access (ZTNA): Micro-Segmentation via Zscaler ZPA
- Next-Gen Firewall Deep Packet Inspection: SSL/TLS & IPS with FortiGate
- Home Office with an Isolated Guest Network