Projects › Plant Network Segmentation with VRF-Lite
Plant Network Segmentation with VRF-Lite
A food-processing plant runs its office, its production line and its visitor Wi-Fi through one core router, all in one routing table. After a ransomware scare the auditors want the production (OT) network unreachable from the office, the guest network unreachable from both, and nobody is allowed to re-address the line: its PLC cell uses 192.168.1.0/24, which the guest network also uses. The access switch, VLANs and hosts are already in place. PLANT-CORE is yours.
Difficulty: advanced · Time: about 60 minutes
Why it matters
Separating OT from IT is the first control in the IEC 62443 zones-and-conduits model, and VRF-lite is how many plants do it on hardware they already own: each zone gets its own routing table, so a route that does not exist cannot be followed. It also lets two zones keep the same addresses, which is common on vendor-installed production cells. Being able to show a zone cannot reach another, rather than just saying so, is what an auditor asks for.
Technologies
- VRF-Lite
- Network Segmentation
- Subinterfaces
- 802.1Q Trunking
- OT Security
Related projects
- Edge Security Zone & DMZ Inspection with FortiGate
- Layer 2 Defense: DHCP Snooping, DAI, and IP Source Guard
- Zero-Trust 802.1X Port Authentication & Dynamic VLANs with Cisco ISE
- Enterprise Cyber Attack & Defense: Mitigating L2/L3 Exploits
- IPv6 First-Hop Security for a Campus Rollout: RA Guard and DHCPv6 Guard
- Enterprise Device Administration: Centralized TACACS+ with Cisco ISE
- Zero Trust Network Access (ZTNA): Micro-Segmentation via Zscaler ZPA
- Next-Gen Firewall Deep Packet Inspection: SSL/TLS & IPS with FortiGate