Projects › Junos Router-on-a-Stick Inter-VLAN Routing with Logical Units and Security Zones
Junos Router-on-a-Stick Inter-VLAN Routing with Logical Units and Security Zones
Kitebridge Software's lab has one SRX300 (LAB-SRX) and one Cisco access switch (LAB-SW), already trunking VLAN 100 (engineering) and VLAN 200 (staging) on Fa0/24. Developers must deploy to the staging server, but a compromised staging box must not be able to open connections back into engineering. Build the tagged logical units on the SRX, put each in its own security zone, and write a policy that lets engineering into staging and nothing back.
Difficulty: intermediate · Time: about 55 minutes
Why it matters
An SRX is a flow-based firewall: an interface in no zone passes nothing, and traffic between zones needs a policy. Router-on-a-stick on an SRX is therefore two jobs, logical units with vlan-tagging for the routing and zones with policies for the security, and leaving out the second is why "it routes on the bench but not in the rack".
Technologies
- Juniper Junos
- Subinterfaces
- 802.1Q Encapsulation
- Inter-VLAN Routing
- Zone-Based Security
- Firewall Policies
Related projects
- Edge Security Zone & DMZ Inspection with FortiGate
- Layer 2 Defense: DHCP Snooping, DAI, and IP Source Guard
- Zero-Trust 802.1X Port Authentication & Dynamic VLANs with Cisco ISE
- Enterprise Cyber Attack & Defense: Mitigating L2/L3 Exploits
- IPv6 First-Hop Security for a Campus Rollout: RA Guard and DHCPv6 Guard
- Enterprise Device Administration: Centralized TACACS+ with Cisco ISE
- Zero Trust Network Access (ZTNA): Micro-Segmentation via Zscaler ZPA
- Next-Gen Firewall Deep Packet Inspection: SSL/TLS & IPS with FortiGate