BuildTheNet

Opening your workspace

Your learning content and tools are loading.

Projects › Port Security Hardening for Open Floor Collaboration Area

Port Security Hardening for Open Floor Collaboration Area

An open-plan co-working floor has four public-facing wall jacks on FLOOR-SW (two hot desks, the lobby kiosk and a spare lobby jack), and twice this quarter someone has plugged in an unmanaged switch or an unknown laptop. Put the four jacks in VLAN 30 (OPEN-FLOOR, 10.30.0.0/24) and lock each to one device: one MAC per port, learned and kept, and the port shut down on violation. The canvas opens on a Cisco Catalyst; to build it on Junos instead, delete FLOOR-SW, place a Juniper EX, and cable HOTDESK-1, HOTDESK-2 and LOBBY-KIOSK to jacks 1-3 (ge-0/0/0 to ge-0/0/2). The checks follow the hosts, so either platform is graded the same way.

Difficulty: foundation · Time: about 35 minutes

Why it matters

Physical wall jacks in public lobbies and open offices are the easiest way onto a network. Port security is the cheapest control that closes them. Every switch vendor has it, under a different name: IOS calls it port security with sticky learning; Junos calls it a MAC limit with persistent learning.

Technologies

Related projects