Projects › Replacing LDP with Segment Routing (SR-MPLS) in a Six-Router Core
Replacing LDP with Segment Routing (SR-MPLS) in a Six-Router Core
A carrier's core has six routers (PE1, PE2 and P1 to P4) in a ring, PE1-P1-P3-PE2-P4-P2-PE1, running OSPF area 0 and LDP. Operations wants to drop LDP and run one protocol, and to gain topology-independent fast reroute. Loopback0 is 10.255.0.N: PE1 1, PE2 2, P1 3, P2 4, P3 5, P4 6. The ring is on the canvas with its links addressed; the OSPF underlay is yours to build there. Design SR-MPLS on IOS XE: a common SRGB, a prefix SID per loopback by index, migration away from LDP without an outage, and TI-LFA on every core link.
Difficulty: advanced · Time: about 70 minutes
Why it matters
Segment routing removes per-tunnel state from the core by putting the path in the packet. It is replacing LDP and RSVP-TE in service-provider and large enterprise cores, and SID arithmetic and migration order are standard interview questions.
Technologies
- Segment Routing
- SR-MPLS
- Prefix-SID
- TI-LFA
- OSPFv2
Related projects
- Dual-Homed eBGP Edge Routing with AS-Path Prepending
- Service Provider MPLS L3VPN for Two Overlapping Customers
- DDoS Mitigation with BGP Flowspec at a Regional ISP
- MPLS Traffic Engineering with RSVP-TE and Fast Reroute
- Advanced BGP Traffic Engineering with Standard & Extended Communities
- Junos eBGP Peering at a Regional Internet Exchange
- Arista EOS eBGP Between Two Business Units After a Merger
- Arista EOS BGP Prefix Advertisement to an Upstream Provider