BuildTheNet

Opening your workspace

Your learning content and tools are loading.

Projects › Service Provider MPLS L3VPN for Two Overlapping Customers

Service Provider MPLS L3VPN for Two Overlapping Customers

A regional carrier is onboarding two enterprise customers onto its MPLS core: Red (a retailer) and Blue (a law firm). Both use 10.1.1.0/24 at their head office and 10.2.2.0/24 at a branch, and both run OSPF with the carrier's PE routers. The core has two PEs (PE1, PE2) and one P router, with Loopback0 addresses 10.255.0.1-3. Design the L3VPN: LDP in the core, a VRF per customer on each PE with its own RD and route targets, MP-BGP VPNv4 between the PEs, and PE-CE OSPF redistributed into BGP and back, so each customer sees only its own sites.

Difficulty: expert · Time: about 80 minutes

Why it matters

MPLS L3VPN is how carriers deliver private WAN services over a shared core, and it is the basis of most enterprise WANs that are not SD-WAN. Explaining how the same prefix stays separate for two customers (RD for uniqueness, RT for membership) is the standard service-provider interview question.

Technologies

Related projects