show vlan
Shows the full VLAN table: names, ports, and each VLAN’s type, MTU and other parameters.
Written by a working field network engineer · CCNA, Security+, CySA+
The full VLAN table. The top half matches show vlan brief; the second half adds each VLAN’s type, SAID and MTU, plus any remote SPAN and private VLAN details. Use it when brief does not give you enough.
Example output
SW1#show vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/3, Fa0/4, Fa0/5, Fa0/6, Gi0/2
10 USERS active Fa0/1, Fa0/2, Gi0/1
20 SERVERS active
99 MGMT active
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
10 enet 100010 1500 - - - - - 0 0
20 enet 100020 1500 - - - - - 0 0
99 enet 100099 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------Reference output: hand-written in standard Cisco IOS format for this example network, not captured from a device.
Useful variants
show vlan id 20show vlan summary
What each column or field means
| Field | Meaning |
|---|---|
VLAN / Name / Status / Ports | The same as show vlan brief. |
Type | enet for Ethernet VLANs. The legacy types (fddi, tr, fdnet, trnet) belong to the default VLANs 1002-1005 and only matter on very old networks. |
SAID | Security association ID, 100000 plus the VLAN number by default. |
MTU | The VLAN MTU, 1500 unless changed. |
When it doesn’t look right
The output scrolls past the information you want.
Narrow it: show vlan id <n> for one VLAN, or show vlan brief for the port lists only.
A VLAN shows act/lshut.
The VLAN was shut down with shutdown under vlan configuration. Run no shutdown in that VLAN.
Related commands
Try it yourself
- VLAN Creation & Naming (free)
- Four Departmental VLANs (free)
Learn it in the CCNA path
- VLAN Basics (2. Network Access)
- Build several VLANs with consistent names (2. Network Access)
Topic
VLANs — Create and name VLANs, assign access ports, and read the VLAN table to prove each port is in the broadcast domain you intended.