show ip arp
Shows the router’s ARP cache: which MAC address it has resolved for each IPv4 address, and on which interface.
Written by a working field network engineer · CCNA, Security+, CySA+
The ARP cache maps IPv4 addresses to MAC addresses on each connected subnet. If a ping to a directly connected host fails, this tells you whether the router ever got as far as resolving its MAC.
Example output
R1#show ip arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.0.12.1 - 0050.7966.6815 ARPA GigabitEthernet0/1
Internet 10.0.12.2 12 0050.7966.6816 ARPA GigabitEthernet0/1
Internet 192.168.10.1 - 0050.7966.6812 ARPA GigabitEthernet0/0
Internet 192.168.10.11 3 0050.7966.6817 ARPA GigabitEthernet0/0
Internet 192.168.10.12 0 0050.7966.6818 ARPA GigabitEthernet0/0
Internet 203.0.113.1 8 0050.7966.6a01 ARPA GigabitEthernet0/2
Internet 203.0.113.2 - 0050.7966.6813 ARPA GigabitEthernet0/2Reference output: hand-written in standard Cisco IOS format for this example network, not captured from a device.
Useful variants
show arpshow ip arp 192.168.10.11show ip arp GigabitEthernet0/0
What each column or field means
| Field | Meaning |
|---|---|
Address | The IPv4 address resolved. |
Age (min) | Minutes since the entry was learned or refreshed. A dash means it is the router’s own address. |
Hardware Addr | The MAC address for that IP, or “Incomplete” while a request is unanswered. |
Interface | The interface the subnet is reached through. |
When it doesn’t look right
An entry shows Incomplete.
The router sent an ARP request and got no reply: the host is off, in a different VLAN, or has a firewall dropping ARP. Check the switch port VLAN and the host’s address and mask.
The first ping to a host shows one timeout (.!!!!).
Normal: the first echo was dropped while ARP resolved. Only a repeated failure is a problem.
Two IPs share one MAC unexpectedly.
Could be proxy ARP or a secondary address, or ARP spoofing. Dynamic ARP Inspection protects access VLANs from the last case.
Related commands
Try it yourself
- Gateway Unreachable: a Mistyped Interface Address (Pro)
- IP Static Routing Setup (Pro)
- Free lab on this topic: Assigning Access Ports to a VLAN
- Or build the example network in the free Sandbox
Learn it in the CCNA path
- See ARP resolve before the first ping (2. Network Access)
- Life of a Packet (3. IP Connectivity)
Topic
Switching Basics — How a switch learns MAC addresses, how to read interface status, and how to fix speed, duplex and administratively down ports.